Category Archives: Embedded

Building the Banana Pi LeMaker Kernel

11 Replies

I recently bought a Banana Pi because I wanted something more powerful than a Raspberry Pi (and because I had store credit to use up).

I wanted to run Debian on it, but not the Raspbian distribution provided by Lemaker because I find it’s too resource heavy for what I will be using my Banana Pi for. I followed Christian Bock’s excellent blog post on how to build a Debian rootfs for the Banana Pi.

More pre-built SD card images are coming out for the Banana Pi, but I wanted to use a spare 1GB microSD card and no one provides images that small, so I went and built my own.

As Christian noted in his blog post, the sunxi kernel sources do not work well on the Banana Pi as they contain a broken sunxi ethernet driver. The NIC is unstable when running at gigabit speeds (my testing showed approximately 60% packet loss). A definite deal-breaker if you need reliable network access. LeMaker was a bit slow in releasing their kernel source, but after users complained it was released on github.

Prerequisites for building the kernel are outlined in LeMaker’s wiki page. Basically you need the following packages:

build-essential u-boot-tools uboot-mkimage binutils-arm-linux-gnueabihf gcc-4.7-arm-linux-gnueabihf-base g++-4.7-arm-linux-gnueabihf gcc-arm-linux-gnueabihf cpp-arm-linux-gnueabihf libusb-1.0-0 libusb-1.0-0-dev git wget fakeroot kernel-package zlib1g-dev libncurses5-dev

This is the Jenkins script I use to build the LeMaker kernel for the Banana Pi:

if [ ! -d "linux-bananapi" ]; then
git clone -b bananapi-3.4 https://github.com/LeMaker/linux-bananapi.git
fi
cd linux-bananapi
git pull
wget https://watchmysys.com/blog/wp-content/uploads/2014/08/linux-bananapi.config -O .config
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- clean
make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage modules
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- INSTALL_MOD_PATH=output modules_install
mkdir -p output/boot/
cp arch/arm/boot/uImage output/boot/
tar -C output -cjvf ../linux-bananapi-3.4.90.tar.bz2 boot/ lib/

I’ve included the above commands in a script at the end of this post. I’ve added additional comments explaining the what and why for people who don’t arbitrarily trust strangers on the internet.

Installation is fairly simple, you need to mount the sdcard /boot and / partitions on your computer and then run:

tar -C /path/to/sdcard -jxvf linux-bananapi-3.4.90.tar.bz2

This will extract /boot/uImage and the kernel modules to /lib/modules/3.4.90-00261-gb3b7287

My kernel configuration includes the sunxi ethernet driver as a module (sunxi_gmac) so that you can unload/reload it if necessary. This means you need to use both the uImage and the modules provided or you will not have network connectivity.

Build script: bash/Jenkins build script
Kernel and modules: linux-bananapi-3.4.90.tar.bz2
Kernel Config: linux-bananapi-3.4.90.config

ACME Systems Arietta G25 bootstrap

Leave a reply

I’m using the ACME Systems Arietta G25 256MB model for a project I’m working on, but their website only provides a bootstrap for the 128MB version. Let’s build a bootstrap for the 256MB version.

The instructions on their website are for Ubuntu 13.10, but I run Debian so these instructions are for Debian 7.

As per their instructions you need to enable the emdebian repository:

user@debian7:~$ sudo -i
root@debian7:~# apt-get install emdebian-archive-keyring
root@debian7:~# echo "deb http://www.emdebian.org/debian/ squeeze main" > /etc/apt/sources.list.d/emdebian.list
root@debian7:~# echo "deb http://ftp.us.debian.org/debian/ squeeze main" >> /etc/apt/sources.list.d/emdebian.list

Even though I’m running Wheezy the repositories in /etc/apt/sources.list.d/emdebian.list are for squeeze. This is necessary due to unavailable packages on Wheezy which are present in squeeze. Please see the Emdebian page for an explanation.

user@debian7:~$ sudo apt-get install libc6-armel-cross libc6-dev-armel-cross binutils-arm-linux-gnueabi u-boot-tools libncurses5-dev gcc-4.4-arm-linux-gnueabi cpp-4.4-arm-linux-gnueabi g++-4.4-arm-linux-gnueabi

Clone the bootloader from ACME Systems:

user@debian7:~$ git clone git://github.com/linux4sam/at91bootstrap.git
user@debian7:~$ cd at91bootstrap
user@debian7:~/at91bootstrap$: git checkout origin/at91bootstrap-3.x -b at91bootstrap-3.x
user@debian7:~/at91bootstrap$: wget http://www.acmesystems.it/www/compile_at91bootstrap/acme.patch -O acme.patch
user@debian7:~/at91bootstrap$: patch -p1 < acme.patch
user@debian7:~/at91bootstrap$: make mrproper
user@debian7:~/at91bootstrap$: make acme_ariettasd_linux_zimage_dt_defconfig
user@debian7:~/at91bootstrap$: wget https://watchmysys.com/blog/wp-content/uploads/2014/07/256mb.patch_.txt -O 256mb.patch
user@debian7:~/at91bootstrap$: patch -p1 < 256mb.patch
user@debian7:~/at91bootstrap$: make CROSS_COMPILE=arm-linux-gnueabi-

Now copy the generated zimage to the boot partition on the sdcard (/dev/sdX1, mounted here at /tmp/arietta/boot):

user@debian7:~/at91bootstrap$: sudo cp binaries/acme_arietta-sdcardboot-linux-zimage-dt-3.6.2.bin /tmp/arietta/boot/boot.bin

Boot the Arietta G25. You should have 256MB of RAM available now.

The 256mb.patch does two things to the at91bootstrap:
1) Changes the size of the memory initialized from 128MB (0x8000000) to 256MB (0x10000000)
2) Changes the Kernel command line to mem=256M so the additional memory is utilized by the Linux kernel

If you aren’t interested in setting up a build environment, you can find the 256MB boot.bin: here. WordPress does not allow .bin files, so you will need to rename boot.bin_.zip to “boot.bin” before copying it to the sdcard boot partition.

Additionally if you want to automate building the bootstrap with Jenkins, here is a shell script you can put into a new Jenkins project to automatically build the zimage. You will need to manually install the toolchain (described above).